JaxChris
09-02-2010, 05:32 PM
Spike's Biohazard Upper/Lower Set - Serial #50
Price from Spike's is 720$ for these parts assembled. Listing for 650$ shipped. It has sat in storage, well oiled, in the bubblewrap since I brought it home months ago (I've had it for a while). Going to put this money toward an SBR stamp for my 14.5 lightweight and a 7.5 or 10.5 upper for that weapon.
If you want a special edition set with a very low and round serial number that only went to staff, media, industry partners, and close friends then here you go.
The upper and lower are assembled, minus a stock set.
The lower has been assembled with the following parts:
- Spike's Tactical Trigger Group (the new standard group, not the old DPMS parts)
- Spike's Tactical Logo'd Ergo Grip
- Ambi-Safety Selector
- Norgon Ambi-Mag Release
- KNS Anti-Rotation Pins
- Spike's Tactical Standard Parts Kit for the remaining lower parts
The important details:
- Shipping will be UPS Ground to your FFL. Make sure your FFL accepts shipments from individuals. Item will ship was payment has been cleared by USPS.
- I will allow Local Pickup within St Petersburg, FL as a FTF. Buyer will sign a bill of sale and provide a photocopy of a FLDL and FL CWP.
- Payment must be in the form of USPS Money Order. I will not accept PayPal as I have already been burned by a once reputable individual.
- Buyer has 3 days from the date their FFL receives the item to request a refund for any reason. Return shipping will be buyers cost and refund will be reduced by 25$ to cover my FFL receiving cost.
- This lower has not received an updated pin inside the ambi-bolt release. Since it has not been assembled, I do not know if it needs it or not. This lower and upper also do not have any laser engravings on it. I received it prior to that treatment because I had planned to coated them, plus a Spike's rail, in a different color. If you wish to have it laser engraved with the stock images, you can send it to Spike's and I will pay Spike's for the laser engraving (but not the shipping).
- I did not mark accepting trades as the only trade I would possibly accept would be an XD-m 3.8 bitone (full kit) with a low round count plus 150$ cash.
- Contact me via email when you post that you are taking it. I am listing this on a couple other sites and the timestamp of the message gets it.
Thanks for looking.
Sorry for the bad pics. The bumpy look is the heavily amount of oil and where the bubblewrap was touching. If you want to see any other close up pics, just ask.
http://i52.tinypic.com/k4b61h.jpg
http://i53.tinypic.com/124io89.jpg
http://i53.tinypic.com/fto4t5.jpg
Price from Spike's is 720$ for these parts assembled. Listing for 650$ shipped. It has sat in storage, well oiled, in the bubblewrap since I brought it home months ago (I've had it for a while). Going to put this money toward an SBR stamp for my 14.5 lightweight and a 7.5 or 10.5 upper for that weapon.
If you want a special edition set with a very low and round serial number that only went to staff, media, industry partners, and close friends then here you go.
The upper and lower are assembled, minus a stock set.
The lower has been assembled with the following parts:
- Spike's Tactical Trigger Group (the new standard group, not the old DPMS parts)
- Spike's Tactical Logo'd Ergo Grip
- Ambi-Safety Selector
- Norgon Ambi-Mag Release
- KNS Anti-Rotation Pins
- Spike's Tactical Standard Parts Kit for the remaining lower parts
The important details:
- Shipping will be UPS Ground to your FFL. Make sure your FFL accepts shipments from individuals. Item will ship was payment has been cleared by USPS.
- I will allow Local Pickup within St Petersburg, FL as a FTF. Buyer will sign a bill of sale and provide a photocopy of a FLDL and FL CWP.
- Payment must be in the form of USPS Money Order. I will not accept PayPal as I have already been burned by a once reputable individual.
- Buyer has 3 days from the date their FFL receives the item to request a refund for any reason. Return shipping will be buyers cost and refund will be reduced by 25$ to cover my FFL receiving cost.
- This lower has not received an updated pin inside the ambi-bolt release. Since it has not been assembled, I do not know if it needs it or not. This lower and upper also do not have any laser engravings on it. I received it prior to that treatment because I had planned to coated them, plus a Spike's rail, in a different color. If you wish to have it laser engraved with the stock images, you can send it to Spike's and I will pay Spike's for the laser engraving (but not the shipping).
- I did not mark accepting trades as the only trade I would possibly accept would be an XD-m 3.8 bitone (full kit) with a low round count plus 150$ cash.
- Contact me via email when you post that you are taking it. I am listing this on a couple other sites and the timestamp of the message gets it.
Thanks for looking.
Sorry for the bad pics. The bumpy look is the heavily amount of oil and where the bubblewrap was touching. If you want to see any other close up pics, just ask.
http://i52.tinypic.com/k4b61h.jpg
http://i53.tinypic.com/124io89.jpg
http://i53.tinypic.com/fto4t5.jpg